System-board jumpers
Use this information to locate the system-board jumpers.
The following illustration shows the locations of the jumpers on the system board.
The following table describes the function of each jumper on the system board.
| Jumper number | Description |
|---|---|
| Force IMM Reset (J12) | For debug purposes only. |
| Low Security (J9101) | Three-pin jumper block. The default position are pins 2 and 3. |
| Trusted Platform Module (TPM) physical presence (J6) | Two-pin jumper. The dwfault is no jumper. Place a jumper on pins 1 and 2 to indicate a physical presence to the IMM2 TPM chip. |
Give documentation feedback