syshealth 指令
此指令提供性能或作用中事件的摘要。
使用 syshealth 指令可顯示伺服器的運行狀況或作用中事件的摘要。
語法:
syshealth [arguments]
引數 | 說明 |
---|---|
summary | 顯示系統性能摘要。 |
activeevents | 顯示作用中事件。 |
cooling | 顯示冷卻裝置運作狀態。 |
power | 顯示電源模組運作狀態。 |
storage | 顯示本端儲存體運作狀態。 |
processors | 顯示處理器運作狀態。 |
memory | 顯示記憶體運作狀態。 |
範例:
system> syshealth activeevents
Severity Source Date Message
-------- ------ ---- -------
Error Memory 2024-11-05T12:09:14+08:00 Invalid memory configuration (Unsup-ported DXCC Population) detected. Please verify memory configuration is valid.
Warning System 2024-11-05T12:10:08+08:00 Secure boot keys were reset to fac-tory default.
system> syshealth summary
Power On
State System running in setup
Restarts 0
Component Type Status
==================================
Cooling Devices Normal
Power Modules Normal
Local Storage Normal
Processors Normal
Memory Critical
System Warning
system> syshealth cooling
Fan Speed(RPM) Speed(% of maximum) Status
=============================================================================
Fan1 Front Tach 21840 72 Normal
Fan1 Rear Tach 18240 70 Normal
Fan2 Front Tach 22080 73 Normal
Fan2 Rear Tach 18240 70 Normal
Fan3 Front Tach 21840 72 Normal
Fan3 Rear Tach 18480 71 Normal
Fan4 Front Tach 21840 72 Normal
Fan4 Rear Tach 18480 71 Normal
Fan5 Front Tach 21840 72 Normal
Fan5 Rear Tach 18240 70 Normal
Fan6 Front Tach 21840 72 Normal
Fan6 Rear Tach 18240 70 Normal
Fan7 Front Tach 22080 73 Normal
Fan7 Rear Tach 18480 71 Normal
Fan8 Front Tach 22080 73 Normal
Fan8 Rear Tach 18240 70 Normal
system> syshealth power
Name Status Rated Power(Watts)
============================================================
PSU 1 Normal 1300
system> syshealth storage
Drives
FRU Name Status
===========================
M.2 Drive 0 Normal
Drive 1-0 Normal
system> syshealth processors
FRU Name Status Clock Speed
===================================================
CPU 1 Normal 2700 MHz
system> syshealth memory
FRU Name Status Type Capacity(GB)
===============================================================
DXCC 7 Normal DDR5 16
提供意見回饋