Skip to main content

Viewing event logs through the Setup utility

Use this information to view event logs through the Setup utility.

To view the POST event log or system-event log, complete the following steps:
  1. Turn on the blade server.
  2. When the prompt <F1> Setup is displayed, press F1. If you have set both a power-on password and an administrator password, you must type the administrator password to view the event logs.
  3. Select System Event Logs and use one of the following procedures:
    • To view the POST event log, select POST Event Viewer.
    • To view the system-event log, select System Event Log.