Skip to main content

Starting the Human Interface Infrastructure (HII) Configuration Application

Use these instructions to start the HII Configuration Application.

To start the HII Configuration Application, complete the following steps:
  1. Turn on the blade server, and make sure that the blade server is the owner of the keyboard, video, and mouse.
    Note
    Approximately 20 to 40 seconds after the server is connected to power, the power-control button becomes active.
  2. When the prompt <F1 Setup> is displayed, press F1. If you have set an administrator password, you are prompted to type the password.
  3. Select System Settings → Storage.
  4. Under Storage, select the ServeRAID adapter you want to configure and press Enter to continue.

When you have finished changing settings, press Esc to exit from the program; select Save to save the settings that you have changed.

Note
For more information, see the Installation and User's Guide for ServeRAID H1135 at http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5088601&brandind=5000008.