Skip to main content

Starting the LSI Configuration Utility program

Use these instructions to start the LSI Configuration Utility program.

To start the LSI Configuration Utility program, complete the following steps:
  1. Turn on the blade server, and make sure that the blade server is the owner of the keyboard, video, and mouse.
  2. When the <<<Press Ctrl-C to start LSI Logic Configuration Utility>>> prompt is displayed, press Ctrl+C.
  3. Use the arrow keys to select the controller from the list of adapters; then, press Enter.
  4. Follow the instructions on the screen to change the settings of the selected items; then, press Enter. If you select SAS Topology or Advanced Adapter Properties, additional screens are displayed.

When you have finished changing settings, press Esc to exit from the program; select Save to save the settings that you have changed.

Note
For more information, see the Installation and User's Guide for ServeRAID H1135 at http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5088601&brandind=5000008.