LEDs are not lit for an I/O module
If LEDs are not lit for an I/O module, the problem could be in the power supplies, the device itself, or the bay where the device is installed.
Problem
The LEDs for one of the I/O modules are not lit, but LEDs for other I/O modules are lit.
Investigation
Perform these steps to resolve the problem:
- Verify that the ac and dc LEDs are lit for all power supplies.
- If the dc LED is not lit on one or more power supplies, see The dc LED is not lit but ac LED is lit.
- If neither the ac LED nor the dc LED is lit for a power supply, see The ac and dc LEDs are not lit for multiple power supplies.
- Swap the I/O module with a working I/O module of the same type. If the problem persists with the device in the new location, contact IBM support for possible replacement.
- If the LEDs on the replacement I/O module are not lit, the problem may be in the device bay. See Isolating component failures.
Give documentation feedback