Skip to main content

volts command errors

This topic lists errors for the volts command.

See Common errors for a list of error messages that apply to all commands. See volts command for information about command syntax and examples of command use.

Table 1. volts command errors. The error table is a multi-row, two-column table where each row describes a CMM CLI command error: column one lists the error reported by the command-line interface and column two describes what the error means.
Error messageDefinition
Error getting voltage data from targetAn error occurs while retrieving voltage data.
Getting power state of blade node_number failed.

where node_number identifies the compute node.

An error occurs while the CMM is reading the power state of the targeted compute node.
No voltage data available for targetA user tries to read voltage data that is not available.
Voltage data is not supported on this targetA user tries to read voltage data from a command target that does not support it.