Removing components
Remove components to reduce the weight of the Flex System Enterprise Chassis so that it can safely be installed in the rack.
Statement 4
![Graphic illustrating safety practices when lifting](d3mm9sym.jpg)
![Graphic illustrating safety practices when lifting](d3mm9sym.jpg)
![]() | ![]() | ![]() |
---|---|---|
≥ 18 kg (39.7 lb) | ≥ 32 kg (70.5 lb) | ≥ 55 kg (121.2 lb) |
CAUTION
Use safe practices when lifting.
Statement 32
CAUTION
To avoid personal injury, before lifting the unit, remove all the blades, power supplies, and removable modules to reduce the weight.
![Graphic showing that you must remove the components and use 3 people to lift the chassis.](nn1gw340.jpg)
Complete the following steps:
- Remove the components from the front of the chassis and place them on a flat, static-protective surface.
- Remove the components from the rear of the chassis and place them on a flat, static-protective surface.
Give feedback