Configuring SNMP on the Flex System chassis

The following procedure describes how to configure SNMP on the Flex System chassis, including SNMPv1 Agent and SNMPv3 Agent.

Procedure

1. Log in to the CMM Web console. Refer to Launching the AMM/CMM Web console.
2. Click Mgt Module Management > Network > Port Assignments to ensure that the setting of SNMP Agent is 161 and the setting of SNMP Traps is 162.
   Note

   To change the SNMP settings, select Enable SNMPv1 Agent or Enable SNMPv3 Agent. Refer to Configuring SNMPv1 Agent and Configuring SNMPv3 Agent.
3. Configure the SNMP event recipients and the Flex System chassis.
   1. Click Events > Event Recipients > Create > Create SNMP Recipient.
   2. In the Descriptive name field, input a name.
   3. From the Status list, select the Enable this recipient check box.
   4. From the Events to receive list, select the Use the global settings check box or the Only receive critical alerts check box, and click OK to return to the Event Recipients page.
      Note

      If you select the Use the global settings check box, you shall click Global Settings on the Event Recipients page to change the settings, and click OK to apply the changes.