System firewall settings

This section describes how to set firewall exceptions.

The following table list the ports used by Hardware Management Pack for SCOM.

Table 1. Ports used by Lenovo XClarity Integrator Hardware Management Pack for Microsoft System Center Operations Manager

Source			Target			Protocol	Notes
Port	Location	Component	Port	Location	Component
Not specified	LXCI	LXCI Service	TCP 5724	Management server	SDK service	N/A	Connect to Operations Manager SDK service.
Not specified	Management server BMC node	Lenovo Hardware MP BMC node	TCP 9500*	LXCI	LXCI Service	HTTPS	You can change the port when installing LXCI.
Not specified	Managed host	Lenovo Hardware MP	TCP 9500*	LXCI	LXCI Service	HTTPS	It is required for BMC auto discovery.
Not specified	LXCI	LXCI Service (localhost/127.0.0.1)	TCP 5432*	LXCI	PostgreSQL	N/A	The port can be changed when the PostgreSQL database is installed.
Not specified	LXCI	LXCI Service	TCP 5988	BMC node	BMC node	HTTP, CIM	It is not required when Redfish protocol is used. The BMC HTTP/HTTPS ports are changeable in BMC portal.
Not specified	LXCI	LXCI Service	TCP 5989	BMC node	BMC node	HTTPS, CIM
Not specified	LXCI	LXCI Service	UDP 427	BMC node	BMC node	SLP	SLP is used to discover BMC.
Not specified	Management server	Lenovo Hardware MP	TCP 161	Chassis	CMM/AMM	SNMP	You can change the ports in CMM portal.
Not specified	Management server	Lenovo Hardware MP	TCP 162	Chassis	CMM/AMM	SNMP Traps
Note The ports marked with an asterisk (*) are registered by LXCI. The others are only used to access specific services in LXCI.