Skip to main content

Effortless Reset

In the Effortless Reset interface, you can permanently erase all data on storage devices, clear all system logs, and reset the whole system to factory default, including credentials and networking.

Prerequisites​

Before performing effortless reset, disable the security drive.
CAUTION
Effortless reset will cause data loss, back up your data before performing effortless reset.
To perform effortless reset, do the following:

  1. Click the Effortless Reset tab in the left pane to enter into the Effortless Reset interface.

  2. Input XCC/BMC user name and password, and click OK.

    Note
    Do not delete the default administrative account. Otherwise, the following error message might be displayed:
    Unable to authenticate to the Effortless Reset page with XCC account, you must create a valid administrative account using the management controller web interface.
    To solve this problem, create a new administrator account. Refer to https://pubs.lenovo.com/xcc-amd/NN1ia_c_useraccounts.
    Figure 1. Input user name and password

  3. Select one or more of the following, input YES to confirm the reset action, and click Start.

    • To erase the data on all RAID volumes and all disk devices (including HDD, SSD, and SED), select Permanently erase all data on storage devices.

    • To clear all system logs, including LSI RAID Event Log and System Event Log (SEL), select Clear all system logs.

    • To reset the credentials and networking of UEFI, BMC, TPM, and CMOS to factory default settings, select Reset all system to factory default, including credentials and network setting.

    Figure 2. Select item to be deleted

  4. When the following page is displayed, wait until the whole progress is completed.
    Figure 3. Effortless reset progress