下载并安装 Broadcom 交换机 EFOS 软件
必须将交换机操作系统文件和 RCF 文件下载到 MetroCluster IP 配置中的每台交换机。
关于本任务
必须在 MetroCluster IP 配置中的每台交换机上重复此任务。- 将交换机软件拷贝到交换机：copy sftp://user@50.50.50.50/switchsoftware/efos-3.4.3.1.stk backup
示例
在此示例中，efos-3.4.3.1.stk 操作系统文件从位于 50.50.50.50 的 SFTP 服务器拷贝到备份分区。需要使用 TFTP/SFTP 服务器的 IP 地址以及所需安装的 RCF 文件的文件名。
(IP_switch_A_1) #copy sftp://user@50.50.50.50/switchsoftware/efos-3.4.3.1.stk backup
Remote Password:*************
Mode........................................... SFTP
Set Server IP.................................. 50.50.50.50
Path........................................... /switchsoftware/
Filename....................................... efos-3.4.3.1.stk
Data Type...................................... Code
Destination Filename........................... backup
Management access will be blocked for the duration of the transfer
Are you sure you want to start? (y/n) y
File transfer in progress. Management access will be blocked for the duration of the transfer. Please wait...
SFTP Code transfer starting...
File transfer operation completed successfully.
(IP_switch_A_1) # - 将交换机设置为在下次重新启动时从备份分区引导：boot system backup
示例
(IP_switch_A_1) #boot system backup
Activating image backup ..
(IP_switch_A_1) # - 验证新引导映像是否在下次引导时处于活动状态：show bootvar
示例
(IP_switch_A_1) #show bootvar
Image Descriptions
active :
backup :
Images currently available on Flash
---- ----------- -------- --------------- ------------
unit active backup current-active next-active
---- ----------- -------- --------------- ------------
1 3.4.3.0 3.4.3.1 3.4.3.0 3.4.3.1
(IP_switch_A_1) # - 保存配置：write memory
示例
(IP_switch_A_1) #write memory
This operation may take a few minutes.
Management interfaces will not be available during this time.
Are you sure you want to save? (y/n) y
Configuration Saved!
(IP_switch_A_1) # - 重新启动交换机：reload
示例
(IP_switch_A_1) #reload
Are you sure you would like to reset the system? (y/n) y - 等待交换机重新启动。
- 在 MetroCluster IP 配置中的其余三台 IP 交换机上重复上述步骤。
提供反馈