跳到主要内容

确认 DR 伙伴已联机

切换完成后,应验证 DR 伙伴是否已获得磁盘的所有权以及伙伴 SVM 是否已联机。

  1. 确认聚合磁盘已切换到灾难站点:storage disk show -fields owner,dr-home

    示例

    在此示例中,输出显示已切换的磁盘设置了 dr-home 字段:

    cluster_A::> storage disk show -fields owner,dr-home
    disk owner dr-home
    -------------------- --------------- -------
    1.11.0 node_A_1 node_B_1
    1.11.1 node_A_1 node_B_1
    1.11.2 node_A_1 node_B_1
    1.11.3 node_A_1 node_B_1
    1.11.4 node_A_1 node_B_1
    1.11.5 node_A_1 node_B_1
    1.11.6 node_A_1 node_B_1
    1.11.7 node_A_1 node_B_1
    1.11.8 node_A_1 node_B_1

  2. 使用 storage aggregate show 命令检查是否已切换聚合。

    示例

    在此示例中,聚合已切换。根聚合(aggr0_b2)处于降级状态。数据聚合(b2_aggr2)处于镜像正常状态:

    cluster_A::*> storage aggregate show

    mcc1-b Switched Over Aggregates:
    Aggregate Size Available Used% State #Vols Nodes RAID Status
    --------- -------- --------- ----- ------- ------ ---------------- ------------
    aggr0_b2 227.1GB 45.1GB 80% online 0 node_A_1 raid_dp,
    mirror
    degraded
    b2_aggr1 227.1GB 200.3GB 20% online 0 node_A_1 raid_dp,
    mirrored
    normal

  3. 使用 vserver show 命令确认辅助 SVM 已联机。

    在此示例中,辅助站点上先前处于休眠状态的同步目标 SVM 已激活并且其 Admin Staterunning 状态:
    cluster_A::*> vserver show
    Admin Operational Root Name Name
    Vserver Type Subtype State State Volume Aggregate Service Mapping
    ----------- ----- ---------- ---------- ----------- --------- ---------- ------- -------
    ...
    cluster_B-vs1b-mc data sync-destination running running vs1b_vol aggr_b1 file file