跳到主要内容

重命名 Brocade FC 交换机

可能需要重命名 Brocade FC 交换机以确保整个配置中的命名一致。

  1. 永久禁用一个光纤网中的一台或多台交换机:switchcfgpersistentdisable

    以下示例显示了 switchcfgpersistentdisable 命令的输出:

    示例

    7840_FCIP_2:admin> switchcfgpersistentdisable
    Switch's persistent state set to 'disabled'
    2018/03/09-07:41:06, [ESM-2105], 146080, FID 128, INFO, 7840_FCIP_2, VE Tunnel 24 is DEGRADED.
    2018/03/09-07:41:06, [ESM-2104], 146081, FID 128, INFO, 7840_FCIP_2, VE Tunnel 24 is OFFLINE.

    7840_FCIP_2:admin>
  2. 重命名一台或多台交换机:switchname new-switch-name

    如果要重命名光纤网中的两台交换机,请对每台交换机使用相同的命令。

    以下示例显示了 switchname new-switch-name 命令的输出:

    示例

    7840_FCIP_2:admin> switchname FC_switch_1_B
    Committing configuration...
    Done.
    Switch name has been changed.Please re-login into the switch for the change to be applied.
    2018/03/09-07:41:20, [IPAD-1002], 146082, FID 128, INFO, FC_switch_1_B, Switch name has been successfully changed
    to FC_switch_1_B.
    7840_FCIP_2:admin>
  3. 重新启动一台或多台交换机:reboot

    如果要重命名光纤网中的两台交换机,请重新启动这两台交换机。重新启动完成后,交换机在所有位置都会重命名。

    以下示例显示了 reboot 命令的输出:

    示例

    7840_FCIP_2:admin> reboot
    Warning: This command would cause the switch to reboot
    and result in traffic disruption.
    Are you sure you want to reboot the switch [y/n]?y
    2018/03/09-07:42:08, [RAS-1007], 146083, CHASSIS, INFO, Brocade7840, System is about to reload.
    Rebooting! Fri Mar 9 07:42:11 CET 2018

    Broadcast message from root (ttyS0) Fri Mar 9 07:42:11 2018...

    The system is going down for reboot NOW !!
    INIT: Switching to runlevel: 6
    INIT:
    2018/03/09-07:50:48, [ESM-1013], 146104, FID 128, INFO, FC_switch_1_B, DP0 Configuration replay has completed.
    2018/03/09-07:50:48, [ESM-1011], 146105, FID 128, INFO, FC_switch_1_B, DP0 is ONLINE.

    *** CORE FILES WARNING (03/09/18 - 08:00:00 ) ***
    10248 KBytes in 1 file(s)
    use "supportsave" command to upload


    *** FFDC FILES WARNING (03/09/18 - 08:00:00 ) ***
    520 KBytes in 1 file(s)
  4. 永久启用交换机:switchcfgpersistentenable

    以下示例显示了 switchcfgpersistentenable 命令的输出:

    示例

    FC_switch_1_B:admin> switchcfgpersistentenable
    Switch's persistent state set to 'enabled'
    FC_switch_1_B:admin>
    FC_switch_1_B:admin>
    FC_switch_1_B:admin> 2018/03/09-08:07:07, [ESM-2105], 146106, FID 128, INFO, FC_switch_1_B, VE Tunnel 24 is DEGRADED.
    2018/03/09-08:07:10, [ESM-2106], 146107, FID 128, INFO, FC_switch_1_B, VE Tunnel 24 is ONLINE.

    FC_switch_1_B:admin>


    FC_switch_1_B:admin> switchshow
    switchName: FC_switch_1_B
    switchType: 148.0
    switchState: Online
    switchMode: Native
    switchRole: Subordinate
    switchDomain: 6
    switchId: fffc06
    switchWwn: 10:00:50:eb:1a:9a:a5:79
    zoning: ON (CFG_FAB_2_RCF_9_3)
    switchBeacon: OFF
    FC Router: OFF
    FC Router BB Fabric ID: 128
    Address Mode: 0
    HIF Mode: OFF

    Index Port Address Media Speed State Proto
    ==================================================
    0 0 060000 id 16G Online FC F-Port 50:0a:09:81:06:a5:5a:08
    1 1 060100 id 16G Online FC F-Port 50:0a:09:83:06:a5:5a:08
  5. 验证是否可从 ONTAP 集群提示符处看到交换机名称变化:storage switch show

    以下示例显示了 storage switch show 命令的输出:

    示例

    cluster_A::*> storage switch show
    (storage switch show)
    Symbolic Is Monitor
    Switch Name Vendor Model Switch WWN Monitored Status
    --------------------- -------- ------- ----- ---------------- --------- -------
    Brocade_172.20.7.90
    RTP-FC01-510Q40
    Brocade Brocade7840
    1000c4f57c904bc8 true ok
    Brocade_172.20.7.91
    RTP-FC02-510Q40
    Brocade Brocade7840
    100050eb1a9aa579 true ok
    Brocade_172.20.7.92