Skip to main content

Removing a fan module

Use these instructions to remove a fan module from the NeXtScale n1200 Enclosure.

To remove a fan, complete the following steps.

Figure 1. Removal of a fan module
Graphic showing the removal of a fan module

  1. Grasp the fan module handle and press the release tab.
  2. Slide the fan module out of the chassis and place it on a flat, static-protective surface.
    Note
    1. When you remove a fan module from the chassis halfway, release the release tab to avoid the slip of the release tab.
    2. When you remove a fan module from the chassis, the remaining fan modules will begin to run at full speed, which will be clearly audible.