Passa al contenuto principale

FQXSPIO0036G : Signal cable and power cable are misconnected for [DeviceName]. Should connect signal cable [RiserOrBPConnectorName1] to [MCIOorMXIOConnectName1], [RiserOrBPConnectorName2] to [MCIOorMXIOConnectName2].

Signal cable and power cable are misconnected for [DeviceName]. Should connect signal cable [RiserOrBPConnectorName1] to [MCIOorMXIOConnectName1], [RiserOrBPConnectorName2] to [MCIOorMXIOConnectName2].

This message is for the use case when an implementation has detected that a device cable has been missconnected.

Severity​

Warning

Alert Category​

Warning - Other

Serviceable​

Yes

CIM Information​

Prefix:PLAT

and ID:0864

SNMP Trap ID​

60

Automatically Notify Support​

No

User Action​

Complete the following steps until the problem is solved:

  1. Reseat the signal cable or power cable of the affected riser card.
  2. Refer to the message to connect the signal cables to the correct connectors. Refer to Cable Routing Guide for information on how to connect the cables.
  3. Update the server firmware (UEFI and XCC) and adapter firmware.
  4. If the problem persists, collect service data log.
  5. Contact Lenovo Support.