Lenovo XClarity Provisioning Manager V3 events
The following events can be generated by the Lenovo XClarity Provisioning Manager.
For each event code, the following fields are displayed:
- Event identifier
- An identifier that uniquely identifies an event.
- Event description
- The logged message string that appears for an event.
- Explanation
- Provides additional information to explain why the event occurred.
- Severity
- An indication of the level of concern for the condition. The severity is abbreviated in the event log to the first character. The following severities can be displayed:
Informational. The event was recorded for audit purposes, usually a user action or a change of states that is normal behavior.
Warning. The event is not as severe as an error, but if possible, the condition should be corrected before it becomes an error. It might also be a condition that requires additional monitoring or maintenance.
Error. The event is a failure or critical condition that impairs service or an expected function.
- User Action
- Indicates what actions you should perform to solve the event. Perform the steps listed in this section in the order shown until the problem is solved. If you cannot solve the problem after performing all steps, contact Lenovo Support.
- LXPM V3 events organized by severity
The following table lists all LXPM V3 events, organized by severity (Information, Error, and Warning). - FQXPMCL0001K : Bootx64.efi is not found. Failed to Boot OS.
Bootx64.efi is not found. Failed to Boot OS. - FQXPMCL0003K : BMC communication failed: DRIVER Mount Failure.
BMC communication failed: DRIVER Mount Failure. - FQXPMCL0004K : BMC communication succeeded. Volume Name Mismatched.
BMC communication succeeded. Volume Name Mismatched. - FQXPMCL0005I : Start to install OS: [arg1].
Start to install OS: [arg1]. - FQXPMCL0006I : Export RAID configuration successfully.
Export RAID configuration successfully. - FQXPMCL0006K : Failed to export RAID configuration.
Failed to export RAID configuration. - FQXPMCL0007I : Import RAID configuration successfully.
Import RAID configuration successfully. - FQXPMCL0007K : Failed to import RAID configuration.
Failed to import RAID configuration. - FQXPMCL0008I : Export UEFI settings successfully.
Export UEFI settings successfully. - FQXPMCL0008K : Failed to export UEFI settings.
Failed to export UEFI settings. - FQXPMCL0009I : Import UEFI settings successfully.
Import UEFI settings successfully. - FQXPMCL0009K : Failed to import UEFI settings.
Failed to import UEFI settings. - FQXPMCL0010I : Export BMC settings successfully.
Export BMC settings successfully. - FQXPMCL0010K : Failed to export BMC settings.
Failed to export BMC settings. - FQXPMCL0011I : Import BMC settings successfully.
Import BMC settings successfully. - FQXPMCL0011K : Failed import BMC settings.
Failed import BMC settings. - FQXPMEM0001M : Unable to locate LXPM firmware image.
Unable to locate LXPM firmware image. - FQXPMEM0002I : LXPM firmware image found. Starting LXPM.
LXPM firmware image found. Starting LXPM. - FQXPMEM0003I : LXPM has exited. Control returned to UEFI.
LXPM has exited. Control returned to UEFI. - FQXPMEM0004I : Launching diagnostic program.
Launching diagnostic program. - FQXPMEM0005I : Boot diagnostic program successfully.
Boot diagnostic program successfully. - FQXPMEM0006M : Unable to locate diagnostic firmware image.
Unable to locate diagnostic firmware image. - FQXPMEM0007M : Diagnostic image cannot be launched as "Console Redirection" is enabled.
Diagnostic image cannot be launched as "Console Redirection" is enabled. - FQXPMEM0008M : Diagnostic image cannot be launched as the image may be corrupt.
Diagnostic image cannot be launched as the image may be corrupt. - FQXPMER0002I : Clearing RAID configuration and internal storage data
Clearing RAID configuration and internal storage data - FQXPMER0002M : Failed to clear RAID configuration.
Failed to clear RAID configuration. - FQXPMER0003I : RAID configuration cleared successfully
RAID configuration cleared successfully - FQXPMER0003M : Failed to erase internal storage drives.
Failed to erase internal storage drives. - FQXPMER0004I : Internal storage drives erased successfully
Internal storage drives erased successfully - FQXPMER0004M : Failed to clear system logs.
Failed to clear system logs. - FQXPMER0005I : All system logs cleared successfully
All system logs cleared successfully - FQXPMER0005M : Failed to load UEFI factory default settings.
Failed to load UEFI factory default settings. - FQXPMER0006I : UEFI factory default settings loaded successfully
UEFI factory default settings loaded successfully - FQXPMER0006M : Failed to load XCC factory default settings.
Failed to load XCC factory default settings. - FQXPMER0007I : BMC factory default settings loaded successfully
BMC factory default settings loaded successfully - FQXPMNM0001G : Failed to set new BMC network parameters.
Failed to set new BMC network parameters. - FQXPMNM0002I : Set BMC network parameters to new values.
Set BMC network parameters to new values. - FQXPMOS0001K : Bootx64.efi is not found. Failed to Boot OS.
Bootx64.efi is not found. Failed to Boot OS. - FQXPMOS0004K : BMC Communication Failed: EMMC2USB Mount Failure.
BMC Communication Failed: EMMC2USB Mount Failure. - FQXPMOS0005K : BMC communication failed: DRIVER Mount Failure.
BMC communication failed: DRIVER Mount Failure. - FQXPMOS0006K : BMC communication succeeded. Volume Name Mismatched.
BMC communication succeeded. Volume Name Mismatched. - FQXPMOS0007K : Failed to read License RTF file.
Failed to read License RTF file. - FQXPMOS0008K : Failed to detect any remote OS media for OS installation.
Failed to detect any remote OS media for OS installation. - FQXPMOS0028I : Start to install OS: [arg1].
Start to install OS: [arg1]. - FQXPMSD0001M : HDD Test was interrupted by the host with a hardware or software reset.
HDD Test was interrupted by the host with a hardware or software reset. - FQXPMSD0002M : A fatal error or unknown test error occurred while the device was executing its self-test.
A fatal error or unknown test error occurred while the device was executing its self-test. - FQXPMSD0003M : Self-test completed having a test element that failed and the test element that failed is not known.
Self-test completed having a test element that failed and the test element that failed is not known. - FQXPMSD0004M : Self-test completed having the electrical element of the test failed.
Self-test completed having the electrical element of the test failed. - FQXPMSD0005M : Self-test completed having the servo (and/or seek) test element of the test failed.
Self-test completed having the servo (and/or seek) test element of the test failed. - FQXPMSD0006M : Self-test completed having the read element of the test failed.
Self-test completed having the read element of the test failed. - FQXPMSD0007M : Hard Drive(s) not found
Hard Drive(s) not found - FQXPMSD0008M : UEFI is not ready for LXPM to send command to test hard drive.
UEFI is not ready for LXPM to send command to test hard drive. - FQXPMSD0009M : Device error detected when LXPM sent a test command to a hard drive.
Device error detected when LXPM sent a test command to a hard drive. - FQXPMSD0010M : UEFI timed out when LXPM sent a test command to a hard drive.
UEFI timed out when LXPM sent a test command to a hard drive. - FQXPMSD0011M : The hard drive is not supported by UEFI while LXPM sent a command to test the hard drive.
The hard drive is not supported by UEFI while LXPM sent a command to test the hard drive. - FQXPMSR0001K : Found unsupported RAID adapter.
Found unsupported RAID adapter. - FQXPMSR0011K : Failed to change disk drives' state.
Failed to change disk drives' state. - FQXPMSR0012I : Change disk drives' state successfully.
Change disk drives' state successfully. - FQXPMSR0021L : Failed to create new virtual disk(s).
Failed to create new virtual disk(s). - FQXPMSR0022I : Create new virtual disk(s) successfully.
Create new virtual disk(s) successfully. - FQXPMSR0031L : Failed to remove existing virtual disk(s).
Failed to remove existing virtual disk(s). - FQXPMSR0032I : Removed existing virtual disk(s) successfully.
Removed existing virtual disk(s) successfully. - FQXPMSS0001K : Failed to mount work partition while getting service data.
Failed to mount work partition while getting service data. - FQXPMSS0002K : Failed to mount work partition while getting debug log.
Failed to mount work partition while getting debug log. - FQXPMSS0003K : No service data file created in the work partition
No service data file created in the work partition - FQXPMSS0004K : No debug log file created in the work partition
No debug log file created in the work partition - FQXPMUP0003K : Unable to obtain the minimum level of UEFI.
Unable to obtain the minimum level of UEFI. - FQXPMUP0004K : Unable to obtain the installed version of UEFI.
Unable to obtain the installed version of UEFI. - FQXPMUP0005K : Unable to obtain the installed version of BMC.
Unable to obtain the installed version of BMC. - FQXPMUP0006K : Unable to obtain the installed version of LXPM.
Unable to obtain the installed version of LXPM. - FQXPMUP0007K : Unable to obtain the installed version of Linux driver.
Unable to obtain the installed version of Linux driver. - FQXPMUP0008K : Unable to obtain the installed version of Windows driver.
Unable to obtain the installed version of Windows driver. - FQXPMUP0101I : Start to update LXPM.
Start to update LXPM. - FQXPMUP0102I : Start to update Window driver.
Start to update Window driver. - FQXPMUP0103I : Start to update Linux driver.
Start to update Linux driver. - FQXPMUP0104I : Start to update UEFI.
Start to update UEFI. - FQXPMUP0105I : Start to update BMC.
Start to update BMC. - FQXPMUP0106I : Successfully updated the firmware.
Successfully updated the firmware. - FQXPMUP0201M : BMC communication failed: EMMC2USB mount failure. Failed to update the firmware.
BMC communication failed: EMMC2USB mount failure. Failed to update the firmware. - FQXPMUP0202M : Transfer the update package error. Failed to update the firmware.
Transfer the update package error. Failed to update the firmware. - FQXPMUP0203M : BMC communication failed: EMMC2USB unmount failure. Failed to update the firmware.
BMC communication failed: EMMC2USB unmount failure. Failed to update the firmware. - FQXPMUP0204M : BMC communication failed: Execute the update command failure. Failed to update the firmware.
BMC communication failed: Execute the update command failure. Failed to update the firmware. - FQXPMUP0205M : BMC communication failed: Get the update status failure. Failed to update the firmware.
BMC communication failed: Get the update status failure. Failed to update the firmware. - FQXPMUP0206M : The level of the update package is too old. Failed to update the firmware.
The level of the update package is too old. Failed to update the firmware. - FQXPMUP0207M : The update package is invalid. Failed to update the firmware.
The update package is invalid. Failed to update the firmware. - FQXPMUP0208M : Failed to execute the reboot BMC command.
Failed to execute the reboot BMC command. - FQXPMVD0001H : Failed to get VPD data.
Failed to get VPD data. - FQXPMVD0002H : Failed to update the VPD data.
Failed to update the VPD data. - FQXPMVD0003I : Update VPD data successfully.
Update VPD data successfully. - FQXPMVD0011K : Failed to get the TPM/TPM card/TCM policy status.
Failed to get the TPM/TPM card/TCM policy status. - FQXPMVD0012K : Failed to set the TPM/TPM card/TCM policy.
Failed to set the TPM/TPM card/TCM policy.
Envoyer des commentaires