System-board connectors
This section contains information on the internal connectors on the system board.
1MicroSD card socket | 17PDB auxiliary power connector |
2Drive backplane or front I/O sideband connector | 18Riser power connector |
3Firmware and RoT security module connector | 19Riser slot 1 connector |
4(Reserved) | 20Processor socket |
5OCP power and sideband connector | 21Memory module slots 1-12 |
6OCP connector | 22Rear I/O connector |
7Power bus bar connector | 23M.2 bay 2 |
8Drive backplane power connector | 24M.2 bay 3 |
9Fan 1 connector | 25SATA 0-5 connector |
10Fan 2 connector | 26NVMe 4-5 connector |
11Fan 3 connector | 27CMOS battery socket |
12RAID power connector | 28(Reserved) |
13Fan 4 connector | 29NVMe 2-3 connector |
14RAID signal connector | 30NVMe 0-1 connector |
15M.2 boot adapter connector | 31Inlet temperature sensor connector |
16PDB sideband connector |
|
Give documentation feedback