UEFI events organized by severity
The following table lists all UEFI events, organized by severity (Information, Error, and Warning).
Event ID | Message String | Severity |
---|---|---|
FQXSFIO0021J | PCIe LER has occurred in PCIe slot [arg1]. The adapter may not operate correctly. | Informational |
FQXSFIO0022J | PCIe Link Width has degraded from [arg1] to [arg2] in PCIe slot [arg3]. | Informational |
FQXSFIO0023J | PCIe Link Speed has degraded from [arg1] to [arg2] in PCIe slot [arg3]. | Informational |
FQXSFIO0027I | The Bus:[arg1] Device:[arg2] Fun:[arg3] is attempted to boot PXE. | Informational |
FQXSFMA0001I | DIMM [arg1] Disable has been recovered. [arg2] | Informational |
FQXSFMA0002I | The uncorrectable memory error state has been cleared. | Informational |
FQXSFMA0006I | [arg1] DIMM [arg2] has been detected, the DIMM serial number is [arg3]. | Informational |
FQXSFMA0007I | [arg1] DIMM number [arg2] has been replaced. [arg3] | Informational |
FQXSFMA0008I | DIMM [arg1] POST memory test failure has been recovered. [arg2] | Informational |
FQXSFMA0026I | DIMM [arg1] Self-healing attempt at Rank [arg2] Sub Rank [arg3] Bank [arg4] Row [arg5] in Device [arg6]. [arg7] | Informational |
FQXSFMA0029I | The PFA of DIMM [arg1] has been deasserted after applying PPR for this DIMM. [arg2] | Informational |
FQXSFMA0030I | A correctable memory error has been detected on DIMM [arg1]. [arg2] | Informational |
FQXSFPU0021I | The TPM physical presence state has been cleared. | Informational |
FQXSFPU0023I | Secure Boot Image Verification Failure has been cleared as no failure in this round boot. | Informational |
FQXSFPU0025I | The default system settings have been restored. | Informational |
FQXSFPU4034I | TPM Firmware recovery is finished, rebooting system to take effect. | Informational |
FQXSFPU4037I | TPM Firmware recovery is finished. | Informational |
FQXSFPU4038I | TPM Firmware recovery successful. | Informational |
FQXSFPU4041I | TPM Firmware update is in progress. Please DO NOT power off or reset system. | Informational |
FQXSFPU4042I | TPM Firmware update is finished, rebooting system to take effect. | Informational |
FQXSFPU4044I | The current TPM firmware version could not support TPM version toggling. | Informational |
FQXSFPU4046I | TPM Firmware will be updated from TPM1.2 to TPM2.0. | Informational |
FQXSFPU4047I | TPM Firmware will be updated from TPM2.0 to TPM1.2. | Informational |
FQXSFPU4049I | TPM Firmware update successful. | Informational |
FQXSFPU4080I | Host Power-On password has been changed. | Informational |
FQXSFPU4081I | Host Power-On password has been cleared. | Informational |
FQXSFPU4082I | Host Admin password has been changed. | Informational |
FQXSFPU4083I | Host Admin password has been cleared. | Informational |
FQXSFPU4084I | Host boot order has been changed. | Informational |
FQXSFPU4085I | Host WOL boot order has been changed. | Informational |
FQXSFSM0007I | The XCC System Event log (SEL) is full. | Informational |
FQXSFDD0001G | DRIVER HEALTH PROTOCOL: Missing Configuration. Requires Change Settings From F1. | Warning |
FQXSFDD0002M | DRIVER HEALTH PROTOCOL: Reports 'Failed' Status Controller. | Warning |
FQXSFDD0003I | DRIVER HEALTH PROTOCOL: Reports 'Reboot' Required Controller. | Warning |
FQXSFDD0005M | DRIVER HEALTH PROTOCOL: Disconnect Controller Failed. Requires 'Reboot'. | Warning |
FQXSFDD0006M | DRIVER HEALTH PROTOCOL: Reports Invalid Health Status Driver. | Warning |
FQXSFDD0007G | Security Key Lifecycle Manager (SKLM) IPMI Error. | Warning |
FQXSFIO0008M | An intra-board UPI dynamic link width reduction has been detected on the link between processor [arg1] port [arg2] and processor [arg3] port [arg4]. | Warning |
FQXSFIO0013I | The device found at Bus [arg1] Device [arg2] Function [arg3] could not be configured due to resource constraints. The Vendor ID for the device is [arg4] and the Device ID is [arg5]. The physical slot number is [arg6]. | Warning |
FQXSFIO0024M | PCIe Correctable Error PFA Threshold limit has been exceeded at Bus [arg1] Device [arg2] Function [arg3]. The Vendor ID for the device is [arg4] and the Device ID is [arg5]. The physical slot number is [arg6]. | Warning |
FQXSFIO0026L | Boot failure: No bootable device. | Warning |
FQXSFIO0027L | Boot failure: PXE server not found. | Warning |
FQXSFIO0028L | Boot failure: Invalid boot sector. | Warning |
FQXSFIO0029G | Correctable CPU link error has been detected on processor [arg1]. | Warning |
FQXSFMA0012L | The [arg1] PFA Threshold limit has been exceeded on DIMM [arg2] at address [arg3]. [arg4] | Warning |
FQXSFMA0027M | DIMM [arg1] Self-healing fail at Rank [arg2] Sub Rank [arg3] Bank [arg4] Row [arg5] in Device [arg6]. [arg7] | Warning |
FQXSFMA0028M | DIMM [arg1] Self-healing attempt number over DIMM level threshold [arg2] at Rank [arg3] Sub Rank [arg4] Bank [arg5] Row [arg6] in Device [arg7]. [arg8] | Warning |
FQXSFPU0021G | Hardware physical presence is in asserted state. | Warning |
FQXSFPU0022G | The TPM configuration is not locked. | Warning |
FQXSFPU0023G | Secure Boot Image Verification Failure Warning. | Warning |
FQXSFPU0024G | Intel UEFI ACM startup failed, make sure TPM is enabled. | Warning |
FQXSFPU0032G | A boot configuration error has been detected. | Warning |
FQXSFPU0038G | A correctable error (Type [arg1]) has been detected by processor [arg2]. | Warning |
FQXSFPU4033F | TPM Firmware recovery is in progress. Please DO NOT power off or reset system. | Warning |
FQXSFPU4035M | TPM Firmware recovery failed. TPM chip may be damaged. | Warning |
FQXSFPU4036F | TPM Firmware recovery is starting. Please DO NOT power off or reset system. | Warning |
FQXSFPU4040M | TPM selftest has failed. | Warning |
FQXSFPU4043G | TPM Firmware update aborted. System is rebooting... | Warning |
FQXSFPU4045G | Physical Presence is not asserted, abort TPM Firmware upgrade. | Warning |
FQXSFPU4050G | Failed to update TPM Firmware. | Warning |
FQXSFPU4051G | Undefined TPM_POLICY found | Warning |
FQXSFPU4052G | TPM_POLICY is not locked | Warning |
FQXSFPU4053G | System TPM_POLICY does not match the planar. | Warning |
FQXSFPU4054G | TPM card logical binding has failed. | Warning |
FQXSFSM0002N | Boot Permission denied by Management Module: System Halted. | Warning |
FQXSFSM0003N | Timed Out waiting on boot permission from Management Module: System Halted. | Warning |
FQXSFSM0004M | An XCC communication failure has occurred. | Warning |
FQXSFSM0006M | Unable to retrieve the system configuration from the XCC. | Warning |
FQXSFSR0003G | The number of boot attempts has been exceeded. No bootable device found. | Warning |
FQXSFTR0001L | An invalid date and time have been detected. | Warning |
FQXSFIO0005M | An intra-board UPI failure has been detected on the link between processor [arg1] port [arg2] and processor [arg3] port [arg4]. | Error |
FQXSFIO0007M | An error has been detected by the IIO on Bus [arg1]. The value of Global Fatal Error Status register is [arg2]. The value of Global Non-Fatal Error Status register is [arg3]. Please check error logs for additional downstream device error data, the physical slot number is [arg4] | Error |
FQXSFIO0010M | An Uncorrectable PCIe Error has Occurred at Bus [arg1] Device [arg2] Function [arg3]. The Vendor ID for the device is [arg4] and the Device ID is [arg5]. The Physical slot number is [arg6]. | Error |
FQXSFIO0011M | A PCIe parity error has occurred on Bus [arg1] Device [arg2] Function [arg3]. The Vendor ID for the device is [arg4] and the Device ID is [arg5]. The Physical slot number is [arg6]. | Error |
FQXSFIO0012M | A PCIe system error has occurred on Bus [arg1] Device [arg2] Function [arg3]. The Vendor ID for the device is [arg4] and the Device ID is [arg5]. The Physical slot number is [arg6]. | Error |
FQXSFIO0014J | A bad option ROM checksum was detected for the device found at Bus [arg1] Device [arg2] Function [arg3]. The Vendor ID for the device is [arg4] and the Device ID is [arg5]. The physical slot number is [arg6]. | Error |
FQXSFIO0017M | IFM: Error communicating with the XCC - IFM may not be deployed correctly. | Error |
FQXSFIO0019J | PCIe Resource Conflict [arg1]. | Error |
FQXSFIO0030M | Uncorrectable CPU link error has been detected on processor [arg1]. | Error |
FQXSFMA0001M | DIMM [arg1] has been disabled due to an error detected during POST. [arg2] | Error |
FQXSFMA0002M | An uncorrectable memory error has been detected on DIMM [arg1] at address [arg2]. [arg3] | Error |
FQXSFMA0008M | DIMM [arg1] has failed the POST memory test. [arg2] | Error |
FQXSFMA0029L | The [arg1] PFA Threshold limit has been exceeded on DIMM [arg2]. [arg3] | Error |
FQXSFPU0018N | CATERR(IERR) has asserted on processor [arg1]. | Error |
FQXSFPU0019N | An uncorrectable error has been detected on processor [arg1]. | Error |
FQXSFPU0030N | A firmware fault has been detected in the UEFI image. | Error |
FQXSFPU0031N | The number of POST attempts has reached the value configured in F1 setup.The system has booted with default UEFI settings. User specified settings have been preserved and will be used on subsequent boots unless modified before rebooting. | Error |
FQXSFPU0034L | The TPM could not be initialized properly. | Error |
FQXSFPU4056M | TPM card is changed, need install back the original TPM card which shipped with the system. | Error |
FQXSFSM0008M | Boot permission timeout detected. | Error |
FQXSFDD0004M | DRIVER HEALTH PROTOCOL: Reports 'System Shutdown' Required Controller. | TEST |