Memory module installation rules and order
Memory modules must be installed in a specific order based on the memory configuration that you implement on your node.
For information on the types of memory module supported by this server, see Memory section in Technical SpecificationsMemory
section in Technical specifications.
Independent memory mode
Memory mirroring
Information about optimizing memory performance and configuring memory is available at the Lenovo Press website:
In addition, you can take advantage of a memory configurator, which is available at the following site:
Lenovo Enterprise Solutions Configurator (Memory Configurations)
Specific information about the required installation order of memory modules in your solution based on the system configuration and memory mode that you are implementing is shown below.
DRAM DIMM installation order
The tray only supports fully populated processor and memory configuration (2 processors and 16 DIMMs per node).
Sub NUMA Clustering 2 (SNC2) is supported and can be enabled in UEFI.
Software Guard Extensions (SGX) is supported. See Enable Software Guard Extensions (SGX) to enable this feature.