Skip to main content

Serial-device problems

Use this information to solve problems related to serial devices.

Number of serial ports identified by the operating system is less than the number of installed ports​

  1. Make sure that:

    • Each port is assigned a unique address in the Setup utility and none of the serial ports is disabled.

    • The serial-port adapter (if one is present) is seated correctly.

  2. Reseat the serial port adapter.

  3. Replace the serial port adapter.

Serial device does not work​

  1. Make sure that:

    • The device is compatible with the server.

    • The serial port is enabled and is assigned a unique address.

    • The device is connected to the correct connector (see System-board internal connectors).

  2. Reseat the following components:

    1. Failing serial device

    2. Serial cable

  3. Replace the following components one at a time, restarting the server each time:

    1. Failing serial device

    2. Serial cable

  4. (Trained technician only) Replace the system board.