Solution components
Use the information in this section to learn about each of the components associated with your solution.
Identifying your component
When you contact Lenovo for help, the machine type, model, and serial number information help support technicians to identify your components and provide faster service.
The enclosure machine type, model number and serial number are on the enclosure label that can be found on the front of the enclosure, as shown in the following illustration.
Figure 1. Enclosure label on the front of the enclosure
| 1 Enclosure label |
The tray model number can be found on the front of the tray, as shown in the following illustration.
Figure 2. SD650 V2 tray model number
Figure 3. SD650-N V2 tray model number
| 1 Tray model number |
QR code
In addition, the system Service Label is located on the inside surface of the tray cover, provides a quick response (QR) code for mobile access to service information. You can scan the QR code with a mobile device using a QR code reader application and get quick access to the Service Information web page. The Service Information web page provides additional information for parts installation and replacement videos, and error codes for solution support.
Figure 4. Service Label and QR code
Network access tag
The Lenovo XClarity Controller network access information for both nodes can be found on the pull out information tag located at the front of the tray. You can use the information on the pull out tag to access the XCC MAC address and LLA for each node. The left node information is on the left side and the right node information is on the right side. You can also use the information tag for your own node labeling information such as the hostname, the system name and the inventory bar code.
Figure 5. Network access information on the pull out tag
Give feedback