FQXPMCL0002K : Failed to read Deployment Manager Signature from USB.
Failed to read Deployment Manager Signature from USB.
- Ensure proper operation of the virtual USB connection.
- Restart BMC via BMC setting under uEFI setup on LXPM left panel. Restart BMC via supported method and reboot the system.
- Reflash BMC firmware.
- Clone the image over and retry the operation.
- Perform AC reset or virtual reseat.NoteWhen performing AC reset, after powering off AC, wait several seconds before powering on AC. After AC power is restored, power on the host system.
- If the problem persists, please contact technical support.