Skip to main content

Install the rubber feet

Use this information to install the rubber feet.

Before you install the rubber feet, complete the following steps:
  1. Read the following sections to ensure that you work safely.

  2. Turn off the server. Disconnect the power cords and all external cables (see Power off the server).

Procedure

Figure 1. Rubber feet installation
Rubber feet installation
Remove the film on the rubber feet, and stick it onto the corner of the server downside as shown.
After you install the rubber feet, complete the following steps:

  1. Install the node if needed (see Install a node).

  2. Reconnect power cords and all external cables.