Operator panel cable routing
See this section to learn how to do cable routing for front operator panel and rear operator panel.
![](se360v2-203-cable-300.png)
Cable | From | To | Cable length |
1 | Front operator panel | System board: Operator panel connector | 200mm |
2 | Front operator panel | Rear operator panel | 370mm |
Note
Press cable 1 into the space between the standoff and the chassis, and route the cable along the chassis as shown.
Figure 1. Front operator panel cable routing
![](se360v2-204-cable-350.png)
![](se360v2-204-cable-350.png)
Give documentation feedback