Skip to main content

Install the M.2 backplane assembly filler

Use this information to install the M.2 backplane assembly filler.

About this task

Attention

Procedure

  1. If there is a M.2 backplane assembly installed on the air baffle, remove it. See Remove the M.2 backplane assembly.
  2. Install the M.2 backplane assembly filler.
    1. Tilt the rear of the filler slightly upward, and place its front against the upper right and left corners of the air baffle.
    2. Press down the filler to insert its clip into the air baffle.
    Figure 1. M.2 backplane assembly filler installation
    M.2 backplane assembly filler installation
After you finish

Proceed to complete the parts replacement. See Complete the parts replacement.

Demo video

Watch the procedure on YouTube