Install the RFID tag

Use this information to install the RFID tag on the front panel.

Procedure

1. Make sure the surface you are installing the tag is thoroughly clean and dry.
2. Install the RFID tag.
   1. Open the RFID tag; then, remove the backing from the base of the RFID tag to expose adhesive.
   2. Position the RFID tag over the ID label plate on the front panel of the compute node.
   3. Press the RFID tag securely against the ID label plate and hold the RFID tag firmly for 30 seconds.
      Note

      • Allow 30 minutes before closing or opening the RFID tag.
      • Allow 24 hours to achieve near maximum adhesion.

      Figure 1. RFID tag installation