Remove the RFID tag
Use this information to remove the RFID tag from the front panel.
About this task
Read Safety inspection checklist and Installation Guidelines to ensure that you work safely.
Power off the corresponding compute node that you are going to perform the task on.
Remove the compute node from the chassis. See Remove the compute node from chassis.
Carefully lay the compute node on a flat, static-protective surface, orienting the compute node with the bezel pointing toward you.
Make sure you have a pliers available.
- If the RFID is attached to the hinge, open the RFID tag.
- Using the pliers, carefully grip the RFID hinge and gently pull and twist the base of the RFID tag to remove it from the ID label plate on the front panel of the compute node. Hold the ID label plate in place while removing the RFID tag.ImportantCarefully remove the RFID tag to avoid damage to the ID label plate.Figure 1. RFID tag removal
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.