Remove the front handle
Use this information to remove the front handle.
About this task
Attention
Read Safety inspection checklist and Installation Guidelines to ensure that you work safely.
Power off the corresponding compute node that you are going to perform the task on.
Remove the compute node from the chassis. See Remove the compute node from chassis.
Make sure you have a T15 Torx screwdriver available.
Procedure
- With a T15 Torx screwdriver, remove the screw that secures the front handle to the chassis; then, remove the handle.Figure 1. Front handle removal
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.
Give documentation feedback