Saltar al contenido principal

FQXSPCA0021I : Sensor [SensorElementName] has transitioned to non-critical from a more severe state.

Sensor [SensorElementName] has transitioned to non-critical from a more severe state.

This message is for the use case when an implementation has detected a Sensor transitioned to non-critical from more severe.

Severity

Info

Alert Category

System - Other

Serviceable

No

CIM Information

Prefix:PLAT

and ID:0526

SNMP Trap ID

22

Automatically Notify Support

No

User Action

Complete the following steps until the problem is solved:

  1. Check the Chassis Management Module or XCC event log for any fan- or cooling-related issues.
  2. Make sure that the airflow at the front and rear of the chassis is not obstructed and that fillers are in place and correctly installed.
  3. Make sure that the room temperature is within operating specifications.