跳到主要内容

FQXSPPW0110M : Non-redundant:Insufficient Resources for [RedundancySetElementName] has asserted.

Non-redundant:Insufficient Resources for [RedundancySetElementName] has asserted.

This message is for the use case when a Redundancy Set has transitioned to Non-redundant:Insufficient Resources.

Severity

Error

Alert Category

Critical - Redundant Power Supply

Serviceable

Yes

CIM Information

Prefix:PLAT

and ID:0810

SNMP Trap ID

9

Automatically Notify Support

No

User Action

Complete the following steps until the problem is solved:

  1. Check if one of power supplies is missing, failed or not installed properly. If so, re-install it.
  2. Check the power supply max rate and power capping policy. If the required power resource is not met, change the power supply or modify power capping mechanism.
    Note
    If new components were installed into the system, this can raise the total system power consumption and surpass the installed power supplies max rating. You may need to upgrade the power supplies to accommodate the new system configuration.
  3. Upgrade all system and chassis (if applicable) firmware to the latest level.
    Note
    If the device is part of a cluster solution, verify that the latest level of code is supported for the cluster solution before the update.
  4. Collect Service Data log.
  5. Contact Lenovo Support.