FQXSPPW0110M : Non-redundant:Insufficient Resources for [RedundancySetElementName] has asserted.
Non-redundant:Insufficient Resources for [RedundancySetElementName] has asserted.
This message is for the use case when a Redundancy Set has transitioned to Non-redundant:Insufficient Resources.
Severity
Error
Alert Category
Critical - Redundant Power Supply
Serviceable
Yes
SNMP Trap ID
9
Automatically Notify Support
No
User Action
Complete the following steps until the problem is solved:
- Check if one of power supplies is missing, failed or not installed properly. If so, re-install it.
- Check the power supply max rate and power capping policy. If the required power resource is not met, change the power supply or modify power capping mechanism.NoteIf new components were installed into the system, this can raise the total system power consumption and surpass the installed power supplies max rating. You may need to upgrade the power supplies to accommodate the new system configuration.
- Upgrade all system and chassis (if applicable) firmware to the latest level.NoteIf the device is part of a cluster solution, verify that the latest level of code is supported for the cluster solution before the update.
- Collect Service Data log.
- Contact Lenovo Support.
Give documentation feedback