FQXSPPU0004M : [ProcessorElementName] has Failed with FRB1/BIST condition.
[ProcessorElementName] has Failed with FRB1/BIST condition.
This message is for the use case when an implementation has detected a Processor Failed - FRB1/BIST condition.
Critical - CPU
SNMP Trap ID
Automatically Notify Support
Complete the following steps:
- If the system board or firmware was just updated, check the Lenovo support site for an applicable service bulletin or firmware update that applies to this processor error.
- If problem persists, collect Service Data log.
- Contact Lenovo Support.