Skip to main content

Install the power distribution board

Use this information to install the power distribution board.

About this task

Attention
Read the following section(s) to ensure that you work safely.

Procedure

  1. Align the power distribution board slots 1 with the alignment pins 2 and lower it into the server; then, slightly slide the power distribution board forward to insert it.
    Figure 1. Power distribution board installation
    Power distribution board installation
  2. Fasten the two screws to secure the power distribution board.
    Figure 2. Screw installation
    Screw installation
  3. Connect the cables to the power distribution board. See Hot-swap power supply unit cable routing.
  4. Align the power distribution board cover pin 1 with the hook 2 and lower it into the server; then, slightly slide the power distribution board cover backwards to insert it.
    Figure 3. Power distribution board cover installation
    Power distribution board cover installation
  5. Fasten the two screws to secure the power distribution board cover.
    Figure 4. Cover screw installation
    Cover screw installation

After you finish

  1. Install the flash power module. See Install the flash power module.

  2. Connect the flash power module cable to the RAID adapter. See Flash power module cable routing.

  3. Install the power supply unit. See Install a hot-swap power supply unit.

  4. Install the top cover. See Install the top cover.

  5. Complete the parts replacement. See Complete the parts replacement.

Demo video

Watch the procedure on YouTube