Skip to main content

Remove the VGA cable (2.5-inch HDD model)

Use this information to remove the VGA cable for the 2.5-inch HDD model.

Before you remove the VGA cable, complete the following steps:
  1. Read the following section(s) to ensure that you work safely.

To remove the VGA cable, complete the following steps:

Figure 1. VGA cable removal - 2.5-inch HDD model
VGA cable removal - 2.5-inch HDD model
  1. Remove the two screws that secure the VGA connector.
  2. Push the VGA connector out of the front I/O assembly.

If you are instructed to return the defective component, please package the part to prevent any shipping damage. Reuse the packaging the new part arrived in and follow all packaging instructions.

Demo video

Watch the procedure on YouTube