Skip to main content

Install the security bezel

Use this information to install the security bezel.

Attention

Before you ship the rack with the server installed, install and lock the security bezel into place.

Before installing the security bezel, if you have removed the rack latches, reinstall them. See Install the rack latches.

To install the security bezel, complete the following steps:

Watch the procedure

A video of this procedure is available at YouTube.

  1. If the key is held inside the security bezel, remove it out of the security bezel.
    Figure 1. Key removal
    Remove the key from inside of the security bezel.

  2. Insert the tab on the security bezel into the slot on the right side of the chassis. Then, press the blue release latch 1 and pivot the security bezel inward until it clicks into place.
    Figure 2. Security bezel installation
    Install the security bezel onto the front of the chassis.

  3. Use the key to lock the security bezel.
    Figure 3. Security bezel lockup
    Lock the security bezel.