Skip to main content

Remove the LOM adapter

Use this information to remove the LOM adapter.

Before removing the LOM adapter:
  1. Remove the top cover. See Remove the top cover.

  2. If riser 1 assembly is installed, remove it to access the LOM adapter slot.

To remove the LOM adapter, complete the following steps:

Watch the procedure

A video of this procedure is available at YouTube.

Figure 1. LOM adapter removal
LOM adapter removal

  1. Loosen the thumbscrew that secures the LOM adapter.
  2. Push the LOM adapter out of the connector on the system board.
  3. Slide the LOM adapter as shown and lift the LOM adapter out of the chassis.

If you are instructed to return the old LOM adapter, follow all packaging instructions and use any packaging materials that are provided.