Skip to main content

FQXSPSE4003I : Security: Login ID: [arg1] had [arg2] login failures from CLI at [arg3].

Security: Login ID: [arg1] had [arg2] login failures from CLI at [arg3].

This message is for the use case where a user has failed to log in to a Management Controller from the Legacy CLI.

Severity

Info

Alert Category

System - Remote Login

Serviceable

No

CIM Information

Prefix:IMM

and ID:0017

SNMP Trap ID

30

Automatically Notify Support

No

User Action

Complete the following steps until the problem is solved:

  1. Make sure that the correct login ID and password are being used.
  2. Have the system administrator reset the login ID or password.