Skip to main content

Remove a memory module

Use this information to remove a memory module.

Attention
  • Disconnect all power cords for this task.

  • Memory modules are sensitive to static discharge and require special handling. Refer to the standard guidelines for Handling static-sensitive devices:
    • Always wear an electrostatic-discharge strap when removing or installing memory modules. Electrostatic-discharge gloves can also be used.

    • Never hold two or more memory modules together so that they do not touch each other. Do not stack memory modules directly on top of each other during storage.

    • Never touch the gold memory module connector contacts or allow these contacts to touch the outside of the memory module connector housing.

    • Handle memory modules with care: never bend, twist, or drop a memory module.

    • Do not use any metal tools (such as jigs or clamps) to handle the memory modules, because the rigid metals may damage the memory modules.

    • Do not insert memory modules while holding packages or passive components, which can cause package cracks or detachment of passive components by the high insertion force.

Before removing a memory module:
  1. Remove the top cover. See Remove the top cover.

  2. Remove the air baffle. See Remove the air baffle.

To remove a memory module, complete the following steps:

Watch the procedure

A video of this procedure is available at YouTube.

Figure 1. Memory module removal
Memory module removal

  1. Carefully open the retaining clips on each end of the memory module slot.
    Attention
    To avoid breaking the retaining clips or damaging the memory module slots, handle the clips gently.
  2. Grasp the memory module at both ends and carefully lift it up to remove it from the slot.
If you are instructed to return the old memory module, follow all packaging instructions and use any packaging materials that are provided.