Pular para o conteúdo principal

FQXSFPU4089G : UEFI extra setting [arg1] value [arg2] for custom default[arg3] is invalid in current UEFI [arg4].

UEFI extra setting [arg1] value [arg2] for custom default[arg3] is invalid in current UEFI [arg4].

Parameters​

[arg1] UEFI extra setting name specified in the exposure config file which is imported by end user.

[arg2] Custom default value specified for the UEFI extra setting in the exposure config file which is imported by end user.

[arg3] UEFI custom default name specified in the UEFI extra setting exposure config file which is imported by end user. Only one custom default is supported now, then always output “”.

[arg4] UEFI current build ID.

This message is reported when the custom default value specified for the UEFI extra setting in the exposure config file is invalid in the current UEFI version. The reason might be hardware configuration or UEFI build mismatch.

Severity​

Warning

User Action​

Complete the following steps:

  1. Check if the current UEFI version is compatible with the UEFI version specified in the exposure config file.
  2. If the current UEFI version does not meet the requirement, update UEFI to the compatible version, and then re-import the exposure config file.
  3. If the custom default value is still invalid, set the setting to a supported value through out-of-band (OneCLI or Redfish), restart the system to make the changes take effect, and then create custom default based on the supported value. (Note: the values of all other settings would be set to custom default value.)
  4. If you need to add the custom default value for the UEFI extra setting through the exposure config file, collect Service Data logs and contact Lenovo Support.