Skip to main content

Complete the parts replacement

Use this information to complete the parts replacement.

To complete the parts replacement, do the following:
  1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left inside your server.

  2. Properly route and secure the cables in the server. Refer to the cable connecting and routing information for each component.

  3. If you have removed the top cover, reinstall it. See Install the top cover.

  4. Reconnect external cables and power cords to the server.
    Attention
    To avoid component damage, connect the power cords last.
  5. Update the server configuration if necessary.

Note
Make sure the latest version of ThinkSystem M.2 with Mirroring Enablement Kit Firmware is applied to avoid virtual disk/array missing after system board replacement.