CPU‑, Kühlkörper- und Lüfterkombinationen
4 x 2,5-Zoll-Modelle
CPU group | Config. | Heat sink | Fan |
Z/X | All configurations | Performance | Performance |
8 x 2,5-Zoll‑/4 x 3,5‑Zoll-Modelle
CPU group | Config. | Heat sink | Fan |
C |
| Aluminum | Standard |
All other configurations | Aluminum | Performance | |
B |
| Aluminum | Standard |
All other configurations | Aluminum | Performance | |
A | All configurations | Standard | Performance |
D | All configurations | Performance | Performance |
10 x 2,5-Zoll-Modelle
CPU group | Config. | Heat sink | Fan |
C |
| Aluminum | Standard |
All other configurations | Aluminum | Performance | |
B | All configurations | Aluminum | Performance |
A | All configurations | Standard | Performance |
D | All configurations | Performance | Performance |
Anmerkung
Für eine CPU sind 6 Lüfter (Steckplatz 1 bis 6) und 2 Lüfter-Dummys (7 bis 8) erforderlich. Für zwei CPUs sind 8 Lüfter erforderlich (Steckplatz 1 bis 8).
Wenn ein OCP 3.0-Ethernet-Adapter installiert ist und das System ausgeschaltet ist, aber dennoch an den Wechselstrom angeschlossen ist, drehen sich Lüfter 5 und 6 mit einer viel niedrigeren Geschwindigkeit weiter. Dies entspricht dem Systemdesign, um eine ordnungsgemäße Kühlung für den OCP 3.0-Ethernet-Adapter sicherzustellen.
Feedback geben