Use this information to resolve issues related to networking.
Cannot wake server using Wake on LAN
- If you are using the dual-port network adapter and the server is connected to the network using Ethernet 5 connector, check the system-error log or IMM2 system event log (see Event logs), make sure:
Fan 3 is running in standby mode, if Emulex dual port 10GBase-T embedded adapter is installed.
The room temperature is not too high (see Technical specifications).
The air vents are not blocked.
The air baffle is installed securely.
Reseat the dual-port network adapter.
Turn off the server and disconnect it from the power source; then, wait 10 seconds before restarting the server.
If the problem still remains, replace the dual-port network adapter.
Could not log in using LDAP account with SSL enabled
Make sure that the license key is valid.
Generate a new license key and log in again.