Skip to main content

FQXSFPU4093G : UEFI setting [arg1] value [arg2] of custom default[arg3] is invalid in current UEFI [arg4].

UEFI setting [arg1] value [arg2] of custom default[arg3] is invalid in current UEFI [arg4].

Parameters​

[arg1] UEFI setting name the same as Redfish DisplayName and System Setup Utility display name.

[arg2] UEFI setting custom default value in Redfish format.

[arg3] UEFI custom default name. Only one custom default is supported now, then always output “”.

[arg4] UEFI current build ID.

This message is reported when a previous custom default setting value cannot be applied in current UEFI version. The custom default value used during load custom defaults is not suitable for the current UEFI setting.

Severity​

Warning

User Action​

Complete the following steps:

  1. Reset a new customer default for this setting for current UEFI version.
  2. If it still failed, contact Lenovo Support for help.