FQXSFMA0012L : The [arg1] PFA Threshold limit has been exceeded on DIMM [arg2] at address [arg3]. [arg4]
The [arg1] PFA Threshold limit has been exceeded on DIMM [arg2] at address [arg3]. [arg4]
Parameters
[arg1] Legacy PFA threshold reach, "High", "Low".
[arg2] DIMM Silk Label, 1-based
[arg3] Address of the system where error occurred
[arg4] DIMM info (S/N, FRU and UDI.), e.g. "739E68ED-VC10 FRU 0123456"
Severity
Warning
User Action
Complete the following steps:
- Reseat affected DIMM.
- Check Lenovo Support site for an applicable service bulletin or firmware update that applies to this memory error.
- Swap the DIMM to another known good location.
- If the problem persists, collect Service Data logs and contact Lenovo Support.NoteThe solution for this error may involve a system board replacement. If TPM encryption has been enabled, back up TPM Encryption Recovery Key.
Give documentation feedback