Common components
Follow instructions in this section to remove and install common components in chassis.
- Air baffle replacement
Follow instructions in this section to remove and install the air baffle. - CMOS battery (CR2032) replacement
Use the following information to remove and install the CMOS battery - CR2032. - External LCD diagnostics handset replacement
Follow instructions in this section to remove or install the external LCD diagnostics handset. - Fan cage replacement
Follow instructions in this section to remove and install the fan cage. - Fan replacement
Follow instructions in this section to remove and install a fan. - Flash power module replacement
Follow instructions in this section to remove or install the flash power module. - Front I/O module replacement
Follow instructions in this section to remove or install the front I/O module. - Front panel replacement
Follow instructions in this section to remove or install the front panel. - Heat sink Torx T30 nut replacement
Use this information to remove and install a heat sink Torx T30 nut. - Intrusion switch replacement
Follow instructions in this section to remove and install the intrusion switch. - M.2 backplane and M.2 drive replacement
Follow instructions in this section to remove and install the M.2 backplane and the M.2 drive. - Memory module replacement
Use the following procedures to remove and install a memory module. - Network adapter replacement
Follow instructions in this section to remove and install a network adapter from or to the front I/O expansion board or the front I/O expansion board module. - OCP Ethernet adapter replacement
Follow instructions in this section to remove or install the OCP Ethernet adapter. - PCIe riser and PCIe adapter replacement
Follow instructions in this section to remove and install the PCIe riser and PCIe adapter installed on it. - PCIe riser board replacement
Follow instructions in this section to remove and install the PCIe riser board. - Power distribution board replacement
Follow instructions in this section to remove and install the power distribution board. - Power supply unit replacement
Follow instructions in this section to remove and install the power supply unit. - Processor and heat sink replacement
Follow the instruction in this section to replace an assembled processor and heat sink, known as a processor-heat-sink module (PHM), a processor, or a heat sink. - Serial port module replacement
Follow instructions in this section to remove and install the serial port module. - System board replacement (trained technician only)
Follow instructions in this section to remove and install the system board. - Top cover replacement
Follow instructions in this section to remove and install the top cover.
Give feedback