跳到主要内容

Install the top cover air flow control

Follow instructions in this section to install the top cover air flow control.

About this task

Attention
  • Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
  • Touch the static-protective package that contains the component to any unpainted metal surface on the server; then, remove it from the package and place it on a static-protective surface.

Procedure

  1. Peel off the liner from the top cover air flow control.
  2. Align the top cover air flow control with the long side and short side of the gasket on the inside of the top cover, then, attach the air flow control to the top cover.
    Note
    Make sure that the air flow control completely seals the vent holes.
    Figure 1. Top cover air flow control installation
    Top cover air flow control installation
  3. Turn the top cover right-side up.

After you finish

Complete the parts replacement. See Complete the parts replacement.