USB assembly cable routing

Use this section to understand the cable routing for the USB assembly.

Note

• If necessary, attach the label to the end of the cable that connects to the system board.
  1. Attach the white space portion of the label to one end of the cable.
  2. Wrap the label around the cable and attach it to the white space portion.
     Figure 1. Label application
     
     
• Route the cable under the compute tray as illustrated below.
• Route the cable through the cable holder and sponge as illustrated below.

Figure 2. USB assembly cable routing

From	To	Label
1 USB assembly cable	1 System board: USB assembly (Front panel I/O) connector	USB 3.0 FRONT IO 1