Parts list
Identify each of the components that is available for your server with the parts list.
Go to Lenovo Data Center Support and navigate to the support page for your server.
Click .
Enter the serial number to view a listing of parts for your server.
It is highly recommended that you check the power summary data for your server using Lenovo Capacity Planner before purchasing any new parts.
T1: Tier 1 customer replaceable unit (CRU). Replacement of Tier 1 CRUs is your responsibility. If Lenovo installs a Tier 1 CRU at your request with no service agreement, you will be charged for the installation.
T2: Tier 2 customer replaceable unit (CRU). You may install a Tier 2 CRU yourself or request Lenovo to install it, at no additional charge, under the type of warranty service that is designated for your server.
F: Field replaceable unit (FRU). FRUs must be installed only by trained service technicians.
C: Consumable and Structural parts. Purchase and replacement of consumable and structural parts (components, such as a filler or bezel) is your responsibility. If Lenovo acquires or installs a structural component at your request, you will be charged for the service.
| Index | Description | Type |
|---|---|---|
For more information about ordering parts:
| ||
| 1 | PCIe adapter | F |
| 2 | PCIe filler (single-slot) | C |
| 3 | PCIe riser air baffle | F |
| 4 | OCP module filler | C |
| 5 | OCP module | T1 |
| 6 | Processor air baffle | F |
| 7 | PCIe riser | F |
| 8 | MicroSD card | F |
| 9 | PCIe riser filler | C |
| 10 | Processor | F |
| 11 | Processor heat sink | F |
| 12 | Memory module | F |
| 13 | CMOS battery (CR2032) | C |
| 14 | Power interface board | F |
| 15 | Processor board | F |
| 16 | Firmware and RoT security module | F |
| 17 | System I/O board | F |
| 18 | Cable guide | F |
| 19 | M.2 drive backplane | F |
| 20 | M.2 drive | F |
| 21 | M.2 drive retainer | F |
| 22 | PSU cage | F |
| 23 | Power supply unit | T1 |
| 24 | PSU interposer | F |
| 25 | Power distribution board | F |
| 26 | GPU air baffle | F |
| 27 | Chassis lift handle | F |
| 28 | Chassis support brackets | F |
| 29 | Chassis | F |
| 30 | Slide rail kit | C |
| 31 | Fan control boards | F |
| 32 | 2.5-inch drive filler (1-bay) | C |
| 33 | 2.5-inch hot-swap drive | T1 |
| 34 | Fan | T1 |
| 35 | External cable | T1 |
| Internal cable | F | |
| 36 | 2.5-inch drive backplane | F |
| 37 | Integrated diagnostics panel | T1 |
| 38 | 8U GPU shuttle | F |
| 39 | PCIe switch cable harnesses | F |
| 40 | PCIe switch board | F |
| 41 | PCIe switch board heat sink | F |
| 42 | PCIe switch shuttle | F |
| 43 | GPU complex | F |
| 44 | GPU and heat sink module | F |
| 45 | GPU complex adapter plate | F |
| 46 | 2U compute shuttle | F |
| 47 | GPU air duct | F |
| 48 | HMC card | F |
| 49 | GPU baseboard | F |