Complete these procedures to configure your system.
- Set the network connection for the Lenovo XClarity Controller
Before you can access the Lenovo XClarity Controller over your network, you need to specify how Lenovo XClarity Controller will connect to the network. Depending on how the network connection is implemented, you might need to specify a static IP address as well.
- Set front USB port for Lenovo XClarity Controller connection
Before you can access the Lenovo XClarity Controller through the front USB port, you need to configure the USB port for Lenovo XClarity Controller connection.
- Firmware updates
Several options are available to update the firmware for the server.
- Configure the firmware
Several options are available to install and set up the firmware for the server.
- Memory configuration
Memory performance depends on several variables, such as memory mode, memory speed, memory ranks, memory population and processor.
- RAID configuration
Using a Redundant Array of Independent Disks (RAID) to store data remains one of the most common and cost-efficient methods to increase server's storage performance, availability, and capacity.
- Deploy the operating system
Several options are available to deploy an operating system on the server.
- Back up the server configuration
After setting up the server or making changes to the configuration, it is a good practice to make a complete backup of the server configuration.
- Update the Vital Product Data (VPD)
After initial setup of the system, you can update some Vital Product Data (VPD), such as asset tag and Universal Unique Identifier (UUID).